Possible problems of plate and frame filter press in operation

The plate and frame filter press is easy to use and welcomed by many users. In actual operation, due to various conditions, some problems may occur in the production of the plate and frame filter press, which may affect the production. The following HZFILTER will explain the possible problems of the plate and frame filter press to you and allow you to avoid them as early as possible.

After regular use of the plate and frame filter press, some unwanted wastes and waste residues will be generated in the body and internal use process. At this time, we need to clean the plate and frame filter press. During the operation of the plate and frame filter press, the filter cloth and filtrate are in contact for a long time, and the external pressure is too high, resulting in more and more solid particles attached to the filter cloth.

If the plate and frame filter press is not cleaned in time, it will cause problems when using the plate and frame filter press in the future, which will affect the service life of the plate and frame filter press. In serious cases, it will also cause the service life of the plate and frame filter press. The plate and frame filter press is blocked. Then the plate and frame filter press may be damaged. Therefore, it is very important to complete the work of the plate and frame filter press. The plate and frame filter press is the same as other equipment, and the cleaning process is not too complicated.

First of all, before cleaning, we need to know the nature of the filter solution of the filter cloth, and then choose the corresponding cleaning method: soak the filter cloth in weak alkaline water, soak it for 10 to 24 hours, then repeatedly wipe the filter cloth secretly, wash it with water, then dry it to 90% dry, and then operate again. In order to withstand more acidic filtrate, we only need to change the soaking solution to weak acid.

When cleaning the plate and frame filter press, the manual method can be used: remove the filter from the plate and frame and immerse it in water. It is also good to rub and add detergent by hand. You can also use a brush, the same universal shoe brush, to remove impurities from the filter cloth. After brushing, replace with clean water for washing.

In the production process of the plate and frame filter press, it is basically easy for users, and there will be no major problems. If there is any problem, you can contact the manufacturer in time and solve it for you.