Fast Opening Automatic Filter Press
HZFILTER Fast Opening Automatic Filter Press
Automatic pressing & return, automatic pressure maintaining, fast automatic plate opening.
The fast opening automatic filter press is designed for the fast filtering cycle demand. During the cake discharging progress, the plates can be opened three or five plates together or all plates opened one time instead of standard one piece of plate opening. It is greatly shorter the cake discharge time.
And it is specially designed for the high-pressure filtering and low cake moisture. It always equipped with high pressure membrane filter plates and air blowing device to get the driest filtered cakes.
Equipped with fully automatic program control system enable to get the highest working efficiency.
Fast opening filter press widely used on the mineral or the other fast filtering demand industries.
High speed, high efficiency
Double sides feeding with rational construction to achieve fast filtering.
Fast with high pressure feeding to improving working efficiency.
8-15 min/cycle based on different slurry.
High pressure membrane squeezing to decrease the cake moisture, which is the best solution model for mining concentrates and residues.
Efficient hydraulic system, the maximum flow rate of 240L / min, fast compression, return, reduce the operation time.
Efficient automatic plate pulling system, mechanical design with independent intellectual property rights and servo motor control make the plate pulling process more accurate.
The highly efficient automatic dip tray liquid receiving system adopts independent hydraulic drive to control the opening and closing action of flap by sections.
Customized different process requirements, matching head pipeline valves and instruments, integrated delivery, saving on-site construction period and cost.
Filter Area: 100~1000m2.
Plate size: Available in 1000, 1250, 1500 and 2000 mm square sizes.
Plate structure: recessed/chamber type, membrane type, plate and frame type available.
Chamber volume: 1.5~20m3.
Cake thickness: 30~50mm.
Feeding Pressure: 10~25 bars.
Working temperature: -10 ~120°C.
Slurry PH: 1-14.